Kraun KW.04 Instrukcja Użytkownika Pobierz pdf (Strona 14)

Manual

www.kraun.com

3.4. WiFi security (For IP cam(w))

You can use the wireless to connect the IP CAM to the network. If your network environment has a 802.11

b/g router or AP running, you can check the “Enable WiFi function” button to use the wireless.

Figure 3-7: WiFi security disabled page

In order to use the wireless network, you need to ll the following elds:

1. SSID – this is the ID of the wireless router or AP of your wireless network environment, must be set

correctly.

2. Security mode – this is the security mode used in the wireless router or AP. Need to choose one of the

three modes – None, WEP and WPA-PSK.

3. WEP : Wireless Encryption Protocol.

4. WPA : WiFi Protected Access.

5. PSK : Pre-Shared Key.

6. TKIP : Temporal Key Integrity Protocol.

7. AES : Advanced Encryption Standard.

8. WEP mode – when the WEP mode is chosen, you need also choose between 64-bit(5 char), 64-bit(10

hex), 128-bit(13 char) and 128-bit(26 hex) encryption mode, and then ll the WEP key correctly.

9. WPA-PSK mode - when the WPA-PSK mode is chosen, you need also choose between TKIP and AES

encryption mode, and then ll the WPA-PSK key correctly. WPA2-PSK is also supported. But WPA

Enterprise or WPA2 Enterprise is not supported.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 36 37

Brak uwag

Kraun KW.04 Instrukcja Użytkownika Strona 14