Kraun KW.04 Instrukcja Użytkownika Pobierz pdf (Strona 4)

Manual

www.kraun.com

2. HARDWARE DESCRIPTION AND QUICK

INSTALLATION/USAGE

The IP CAM is designed to be very easy to install and use. First, let’s see the major components of the IP

CAM products.

2.1. Major hardware components.

The major components on the front panel of the IP CAM products are the built-in microphone, lens and

LEDs :

1. Microphone – for receiving the audio/voice. Eective distance is about 5 meters.

2. Lens – the focus of the lens is xed, you do not need to spend time to adjust the focus, the eective

focus range is from 30cm to innity.

3. IR LEDs – there are totally 11 IR LEDs that can provide approximately 10m distance night vision.

4. Light detector – this light detector can detect when the light is becoming dark and turn on the IR

LEDs automatically.

5. Status indication LED (red) – this LED is to indicate the Internet connection status. When the Internet

connection is connected, the LED will be constant red light. If there is any Internet connection

problem, the LED will be blinking red light.

6. Ethernet indication LED (blue) – this LED is to indicate if the Ethernet link is ok and packet trac is

sending/receiving. When the Ethernet cable is connected, the LED is constant blue light. When there

is packet sending/receiving, the LED is blinking blue light.

Figure 2-1: Major components in the front panel

The major components on the back panel of the IP CAM products are the bracket screw jack, power jack,

Ethernet jack and reset button:

1. Bracket screw jack – this is the position to screw in the bracket of the IP CAM. With the bracket, you

can put the IP CAM on the desk, on the wall or on the ceiling.

2. Power jack – this is the place to plug in the power adaptor. The power needed for this IP CAM is

5V/1.0A, please make sure you are using the correct power adaptor.

1 2 3 4 5 6 7 8 9 ... 36 37

Brak uwag

Kraun KW.04 Instrukcja Użytkownika Strona 4