Kraun KW.04 Instrukcja Użytkownika Pobierz pdf (Strona 5)

Manual

www.kraun.com

3. Ethernet jack – this is the place to plug in the RJ45 Ethernet cable. When the Ethernet link is ok, the

Ethernet indication LED on the front side will be blue light.

4. Reset button – this is the button to reset the IP CAM to default factory settings. You need to use a

small stick like pencil or tooth stick to press the reset button for more than 3 seconds to enable the

reset function. Usually when you forgot the administrator account, you will probably need to do this

reset action to reset to the default factory settings. Please refer to section 3.16 for more details.

5. Antenna jack(for IP Cam

(w)) – this is the place to hold the wireless antenna. The antenna must be

plugged to let the 802.11 b/g wireless work.

Figure 2-2: Major components in the back panel

2.2. Quick installation and usage

There are only three things that you need to do to see the video from the IP CAM.

1. Connect the IP CAM to the home/oce network.

2. Install the KraunView software on the notebook/PC.

3. Key in the ID/password of the IP CAM(from the ID/Password card) on the KraunView, and then you can

see the video.

1 2 3 4 5 6 7 8 9 10 ... 36 37

Brak uwag

Kraun KW.04 Instrukcja Użytkownika Strona 5