Kraun KW.04 Instrukcja Użytkownika Pobierz pdf (Strona 6)

Manual

www.kraun.com

First, Connect the IP CAM to the home/oce network

Please connect the IP CAM accessaries to the IP CAM body correctly, including the antenna, bracket, power

adapter and Ethernet cable, as shown in Figure 2-3. And connect the other end of the Ethernet cable to the

home network or oce network. Usually, this Ethernet cable is plugged into a home NAT/router device or

an Ethernet switch if in the oce, as shown in Figure 2-4. Since the default settings of the IP CAM use DHCP

function and very often there is a DHCP server on most of the Home/oce network, the IP CAM should be

connected to the Internet immediately. The Internet status LED is constant red light to indicate this good

connection status. If the LED is blinking, please refer to section 3.3~3.5 to try other network settings.

Figure 2-3: IP CAM connection diagram.

Figure 2-4: Connect Ethernet cable to a switch/router.

1 2 3 4 5 6 7 8 9 10 11 ... 36 37

Brak uwag

Kraun KW.04 Instrukcja Użytkownika Strona 6