Kraun KW.04 Instrukcja Użytkownika Pobierz pdf (Strona 16)

Manual

www.kraun.com

3.5. Advanced Network

In some special situation, your network environment only provides PPPoE connection(ADSL service), there

is no NAT/router available. You will then need to set the PPPoE settings in the “Advanced Network” page. Only

the PPPoE username and password are needed to let PPPoE work. After the “Save&Apply” button is pressed,

the PPPoE function will work immediately. You can check the “Registration status” in the “Information” page

to see if the IP CAM is registered using the PPPoE connection.

Please be noticed that the DHCP or static IP settings in the “Network” page can work together with the

PPPoE connection. Only that the PPPoE has higher priority, so, if the PPPoE is working, the IP CAM will use

PPPoE to connect to the Internet.

The default setting is “Disable PPPoE”.

Figure 3-10: Advanced network settings page

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 36 37

Brak uwag

Kraun KW.04 Instrukcja Użytkownika Strona 16